• All special-order spa covers ordered by Pettis Pools are standard with a foam taper of 4” to 2.5” and a foam density of 1.5 lbs. If you would like to upgrade these options, please contact Nickole Jusewicz.
  • All special-order spa covers ordered by Pettis Pools come standard with a full- length heat seal. This is an important feature for the insulation and energy efficiency of your spa cover.
  • All special-order spa covers are in compliance with ASTM standards.
  • A 50% deposit is required for Pettis Pools to place your spa cover order.
  • Delivery & Installation Available for $99.00 within 15 miles of either store location (Old spa cover will be left curbside)
  • Removal of Old Spa Cover $50.00

Up to 96″ Standard Vinyl Cover Price $769+tax

Up to 96″ Weather-Shield Upgraded Cover Price $799+tax

**Weather-Shield is a 100% solution dyed polyester fabric. This material reduces the covers weight by 25% and is 3X stronger than vinyl.

**Special for MAAX Spa Owners only! Order a black weather-shield replacement cover for your hot tub at the reduced price of $599+ tax**

Measuring Guide

Use this guide as an easy reference to help measure your spa. All measurements are the responsibility of the spa owner.

I.What You Will Need:

• Pen or Pencil
• Tape measure
• Straight edge or framing square

II. How to Measure:

Round up measurements to the nearest half inch or inch. A cover that is 1-2
inches larger will fit your spa fine, but a cover that is too small will decrease
the efficiency of the insulation.

    III. Choose the Shape that Best Resembles Your Spa


    Spa Shape

    IV. Choose a Fold/Hinge:

    The “A Fold” cuts the A dimension in half, the “B Fold” cuts the B dimension in half.
    **If you have a spa that is perfectly square, the fold/hinge does not need specification.

    Considerations:

    • Where is the control panel located? It is most common for covers to fold away from the control panel.
    • The longer dimension is typically the one that gets folded in half, but that is not always the case.
    • Ask yourself: Is there anything obstructing the path of the cover opening and closing that may change the fold? (ie: fence)
    Fold/Hinge

    V. How to Measure Radius Corners:

    Measure Radius Corner
    Measure Radius Corner

    VI. Measure the Skirt and Safety Strap Length:

    Safety Length A

    The cover skirt is the flap that hangs around the edge from the bottom of your cover. Measure the skirt of your spa form the bottom of the cover down. If your cover does not have a skirt, enter zero; the minimum length for a skirt is 1.5”.

    Safety Length B

    To get an accurate measurement of the safety strap, you need to measure the skirt plus the strap. DO NOT include the clip in your measurement. The strap needs to hang at least 1.5” below the skirt.

    **Straps are required on all covers.

    VII. Strap Position

    Strap Position Strap Position
    ** Strap location measurements are not guaranteed.

    VIII. Pick Your Cover Material & Color

    Weather Shield Upgrade Color Options:
    Regular Vinyl Color Options:

    Additional Information

      III. Choose the Shape that Best Resembles Your Spa


      Spa Shape

      IV. Choose a Fold/Hinge:

      The “A Fold” cuts the A dimension in half, the “B Fold” cuts the B dimension in half.
      **If you have a spa that is perfectly square, the fold/hinge does not need specification.

      Considerations:

      • Where is the control panel located? It is most common for covers to fold away from the control panel.
      • The longer dimension is typically the one that gets folded in half, but that is not always the case.
      • Ask yourself: Is there anything obstructing the path of the cover opening and closing that may change the fold? (ie: fence)
      Fold/Hinge

      V. How to Measure Radius Corners:

      Measure Radius Corner
      Measure Radius Corner

      VI. Measure the Skirt and Safety Strap Length:

      Safety Length A

      The cover skirt is the flap that hangs around the edge from the bottom of your cover. Measure the skirt of your spa form the bottom of the cover down. If your cover does not have a skirt, enter zero; the minimum length for a skirt is 1.5”.

      Safety Length B

      To get an accurate measurement of the safety strap, you need to measure the skirt plus the strap. DO NOT include the clip in your measurement. The strap needs to hang at least 1.5” below the skirt.

      **Straps are required on all covers.

      VII. Strap Position

      Strap Position Strap Position
      ** Strap location measurements are not guaranteed.

      VIII. Pick Your Cover Material & Color

      Weather Shield Upgrade Color Options:
      Regular Vinyl Color Options:

      Additional Information